How to enter results of Evoked Potentials?

See also: Test Type Working Principles 

Click on this support page as a good starting point for understanding Custom Test Types.

ABR and other evoked potentials (e.g. ASSR) can be stored in Audiqueen.

There are two ways to enter ABR  results into Audiqueen.

1. If your measuring apparatus allows you to make a test report (typically a pdf file) with the test results, Audiqueen’s Easy File Attach will do the job for you.
   • Audiqueen opens the software that comes with the apparatus, then you perform the test, save the report, close the application, and Audiqueen will fetch and import the report automatically.  
   • For this you can use the built-in ABR custom test (see How do I add a built-in Custom Test? & How to configure the Easy File Fetcher? ).
     
     
2. If your measuring apparatus can only create a printed report, you can scan this document and Audiqueen then allows you to enter this pdf manually. If the scanner is connected to Audiqueen, this is a very easy and seamless operation.
   For this, you can use the built-in AB custom test (see How to set up a document scanner ).

The ABR results are summarized in the list showing the stimulus used and the indices. Audiqueen displays a preview of the report. 
The original report can be readily opened with the proper software (e.g. Acrobat Reader for pdf reports).

This feature is not available in the web viewer.   Audiqueen's web viewer displays the results entered in Audiqueen's Workstations.